The Lindapter Beam Clamp rental from LGH.
Lindapter beam clamps give crews a simple way to connect steel sections without drilling, welding, or permanently modifying the beam. For temporary rigging, lifting, and material handling setups, this can be useful when an existing structure needs to remain unchanged.
LGH rents the Lindapter Type FC Flush Clamp, also known as a Type FC girder clamp. This all-in-one beam connection device adjusts to fit both beam width and flange thickness, making it a practical option for certain temporary beam connections and monorail-style setups.
Lindapter beam clamps are mechanical connection devices used to attach steel sections together. Instead of drilling holes or welding to the structure, the clamp grips the beam flanges and creates a bolted connection.
The Type FC Flush Clamp is supplied as a pre-configured assembly and does not require a separate location plate. It is designed for quick installation and can be used with parallel or tapered flanges up to 10 degrees.
The Type FC Flush Clamp can be used to connect steel sections in applications where a temporary or removable beam connection is needed. In lifting and rigging applications, these clamps may help crews create a temporary monorail-style arrangement or bridge a gap between two points.
Common uses include:
The full setup must always be reviewed before use, including the beams, clamp orientation, load weight, load path, hoist, trolley, rigging, and center of gravity.
LGH rents the Lindapter Type FC Flush Clamp model LFCM16.
Key specifications include:
Because tensile resistance and slip resistance are different, the correct capacity depends on how the load is applied. Always review the manufacturer’s specifications and full rigging setup before use.
Lindapter clamps can be useful when crews need a steel-to-steel connection but cannot drill, weld, or alter the existing structure. This can save time, reduce the need for hot work, and allow the connection to be removed after the project is complete.
Benefits include:
You can check out more information in the YouTube video from the manufacturer below.
Lindapter beam clamps may be a good fit when the project requires a temporary beam connection and the beam dimensions fall within the approved range.
Consider the Type FC Flush Clamp when:
These clamps are simple, but the application still needs careful planning. The clamp is only one part of the system.
The Lindapter FC Beam Clamp inside the LGH Rental Center warehouse.
LGH rents Lindapter beam clamps for temporary beam connection and rigging applications. Our rental specialists can help review your beam dimensions, flange thickness, connection angle, load requirements, and overall jobsite setup.
For help choosing Lindapter beam clamps, Type FC Flush Clamps, hoists, trolleys, gantries, or other rigging equipment for your next project, contact LGH today or call 800-878-7305 to speak with a rental specialist.
Lindapter beam clamps are mechanical devices used to connect steel sections without drilling or welding.
The Type FC Flush Clamp is a Lindapter girder clamp designed as an all-in-one beam connection assembly. It adjusts to suit beam width and flange thickness.
No. Lindapter beam clamps create a mechanical connection and do not require welding or drilling.
The Type FC Flush Clamp rented by LGH fits flange thicknesses from 3/16 in. to 3/4 in. and flange widths from 3 in. to 7 in.
Yes, they may be used in certain temporary monorail-style arrangements when the beams, clamps, hoist, trolley, rigging, and full system are properly rated and configured.
LGH is North America’s largest single organization devoted exclusively to the provision of lifting and moving equipment for rent. LGH holds the most comprehensive inventory for hoisting, rigging, jacking, pulling, material handling, and safety equipment. With over 90,000 pieces, discover your next project solution at RentLGH.com.
